Quick charger for BB-LA6 battery

Item No.: PTC-LA6
Description Specification Related models
Quick charger for BB-LA6 battery

The PTC-LA6 is designed for use with BB-LA6 Lead-acid batteries,  three-level charging circuit controlled by digital processor to ensure full charging and maximum battery life.

The battery is charged at high rate until reach a preset terminal voltage, then the charge current will be tapered off gradually while the battery is held at the terminal voltage until the charging  current decreases to one tenth(10%) of bulk charge rate.

Auto Capacity Detection:  if the battery is in saturated state, the charger will stop charging the battery, and the charge indicator light will turn into green(READY).

Auto Temperature  Detection: When battery temperature is too low, charger will charge battery with micro electric current, until battery temperature return to normal, then the charger will transfer to normal current charging.

Wide range input voltage
Input Voltage 110/220 VAC or 18 to 30 Vdc
Input Current 1A(Max) at 110VAC
0.5A(Max) at 220VAC
5A(Max) at 20Vdc to 30Vdc
Reverse Polarity Protection Fully protected on DC input and battery outputs
Bulk charging rate 1.1A (C/5)
Bulk to overcharge transition Voltage 14.8V Vdc
Overcharge Terminate Current 110mA(c/50)
Float Charge Voltage 13.7 Vdc
Float to bulk transition voltage 12.0 Vdc
Temperature coefficient on voltage levels -12mV/
Current drain on battery 5 μA Max (with power off)
Nominal charge time 6hours(with 80% discharged battery)
Panel indicators POWER ON and FAULT CHARGE, READY
Operating controls POWER ON/ AC ON/ DC switch
Dimensions 259*103*163(W*H*D)MM
Temperature operating 0℃ to +60℃ (ambient)
BB-LA6(PTO-LA6 Lead acid battery)